*Acoustic Detection Pipe Nanyang Acoustic Detection Pipe Grouting Pipe
Clamp-type Acoustic Detection Pipe Spiral Type Acoustic Detection Pipe Sleeve-type Acoustic Detection Pipe Grouting Pipe When buying high-quality and low-cost road and bridge materials, please choose Hebei Cangzhou Huayang Iron and Steel Co., Ltd.
b br Clamp-type acoustic detection tube
Connection principle: There is a
shaped convex groove at the socket end of the clamp-type acoustic detection tube. , equipped with a rubber sealing ring. During installation, insert the socket end of the sound side pipe into the socket end to the marking position, and use special hydraulic pliers to perform the
forming groove and
one side of the groove at the same time. The extruded rubber sealing ring plays a sealing role after being squeezed, and the pipe at the socket and socket end of the clamping part shrinks and deforms at the same time (the cross section forms a hexagonal shape) to play a positioning and fixing role, thus effectively realizing the connection of the acoustic side pipe.
Sealing principle: The rubber
ring shrinks radially and holds tightly.
Principle of anti-pullout: The clamping part is deformed, the middle is small and the two ends are large.
The principle of rotation: the clamp is pressed into a hexagonal shape and cannot be rotated. Features:
Sealing: After being extruded, the
rubber ring shrinks radially and hugs the insertion end of the sound side tube until it is deformed, which has excellent sealing performance.
Vibration resistance: The clamp-type joint seals the connection part at one time, avoiding the possibility of loose joints.
Pull-out resistance: The clamping part deforms, becomes smaller in the middle and larger than the two ends, and has excellent pull-out resistance.
Torsion resistance: The clamping part is in a hexagonal shape, so that the sound side pipes cannot slide relative to each other after being connected.
Break resistance: The connection part does no harm to the steel pipe itself, and there is a socket that is twice the diameter of the pipe at the joint.
Protrusion: The maximum diameter of the convex joint is less than or equal to our pipe diameter.
Verticality: Because there are
sockets twice the diameter of the pipe at the joint, the straightness of the connection can be well ensured.
Operational performance: save time, effort and cost, and the installation is successful in one time.
Economy: No short pipe ends are wasted, and the total cost is lower. <
57*2.5 acoustic pipe Nanyang acoustic pipe grouting pipe